Reasons Why Ring Doorbell Not Flashing When Charging (Fixes Included)

Because the charger is malfunctioning, the USB cable is broken, the doorbell is improperly placed into the charger, or the doorbell is broken, your Ring doorbell may not flash when it is charging.

You can attempt fixing the issue by inspecting the charger and USB cord for damage, confirming that the doorbell is correctly put into the charger, and charging the doorbell in a different place.

You can also power cycle the doorbell, update the doorbell’s software, or get assistance from Ring support.

Why is Ring Doorbell Not Flashing When Charging?

There are a few possible causes for your Ring doorbell’s failure to light while charging. The following are a few of the most typical causes:

1. Defective Charging Cable

Here are a few potential causes for a charging cable to malfunction.

Physical harm: The most frequent reason why a charging cable fails is physical harm. The cable is susceptible to damage by being cut, twisted, or bent. The cable might fail from even a tiny nick or tear.

Corrosion: Over time, the cable’s metal conductors may corrode, particularly if they are exposed to moisture. The cable may no longer be able to conduct energy as a result of this.

Bad caliber: Some charging cables just use subpar construction materials, which might cause them to break down too soon.

You may test your charging cord in a few different ways if you suspect it could be faulty. To start, try charging your device using a different cord. If the alternative cable functions, the issue must be with your primary cable.

Using a toothpick or cotton swab to clean the connections on the initial cable is another option. If it still doesn’t work, you’ll have to get a new cable.

Related Article: Are Blink Cameras Compatible with Ring?

2. Weak Connection

Your device’s charger plugs into a port called a charging port. Having a damaged charger port may result in a loose connection. The charging port may be twisted or clogged with debris if this occurs.

A charger’s connection to an outlet is made by the charger cord. A loose connection may result from damage to the charger cable. The charger cord may become frayed or bent, which may cause this.

Depending on the amperage or voltage, the charger might not work with the ring doorbell. A loose connection could result from this, which would prohibit your doorbell from charging properly.

A faulty charger cable, a dirty or broken charger port, or a charger that is incompatible with your device can all lead to a loose charger connection.

If this problem persists, try cleaning the charging port with a sharp object. If that still doesn’t work, you can try a new charger, or a different charging cable, or charge your device somewhere else.

If you have followed all of these instructions but the loose connection persists, your device’s charging port is probably broken, and you have to take it to an authorized professional to have it fixed or replaced.

Related Article: Can I Have Two Ring Accounts on The Same App?

3. Power Issues

When your Ring doorbell is charging, it may not flash because the doorbell is not receiving enough power to do so.

This may occur if the USB cable is broken, the charger is malfunctioning, or the outlet you are using is not supplying enough power.

Here are several solutions you can try to have your Ring doorbell’s power problem fixed.

• First, look for damage to the USB cable and charger.
• Use a different USB cable or charger if they are damaged.
• Try charging the doorbell somewhere else if the outlet you are using isn’t functioning correctly.
• By unplugging the doorbell for 30 seconds, then plugging it back in, you can also perform a power cycle.
• Finally, update the firmware on the doorbell.

If you have followed all of these instructions and the power problem still persists, get assistance from Ring support.

4. Problems in Charging Port

When a Ring doorbell’s charging port is problematic, it means that there are problems with the actual connector that the gadget uses to charge.

These issues can result in sporadic charging or stop the doorbell from blinking while it is charging properly.

Sometimes, unintentionally inserted foreign objects can block the charging port from properly accommodating the charging wire.

Start by looking for physical damage or foreign objects in the charging port of your Ring doorbell before trying to fix the issue. To gently clean it, use a brush or compressed air, but stay away from liquids.

Try a different charging cord, and make sure to utilize Ring-approved accessories. To avoid damaging the contacts on the port, use care when handling the cable.

Related Article: Can I Ring My Ring Doorbell Remotely: How to Ring the Doorbell From Anywhere?

5. Disabled Battery Indicator

The Ring doorbell’s settings or app offer the option to turn off the battery indication. An icon or LED light that displays the Ring doorbell’s current battery level serves as the battery indicator in most cases.

The battery indicator is typically turned on by default to give consumers a simple method to check the battery’s state and determine when it needs to be recharged.

Employing the Ring App Follow these procedures to enable or disable the battery indication through the Ring app:

• On your smartphone, launch the Ring app.
• From the list of available devices, pick your Ring doorbell.
• Enter the battery settings or device settings.
• Find a setting that affects the battery indication and turn it on or off as you see fit.

Also, you can do the following,

Depending on the particular model of your Ring doorbell, the procedure for turning the battery indication on or off may differ slightly. For comprehensive instructions, consult the device’s user guide or the official Ring website.

It’s vital to remember that if you off the battery indicator, you won’t see any visual cues about the battery’s condition.

To prevent any unplanned device downtime caused by a low battery, it’s essential to have alternate methods of monitoring the battery level, such as checking the app or setting up battery notifications.

Related Article: Does Ring Doorbell Need Battery if Hardwired?

How Do You Hard Reset Your Ring Doorbell?

You might attempt a hard reset If your doorbell does not flash or light up while it is charging. You can restart the device setup process by performing a hard reset Giga Secure.

The two steps of doing a hard reset are as follows:

• For a full 30 seconds, depress the doorbell’s right-side button.
• When the light starts to flash a few times, indicating that the device is restarting, release the button.

Allow the process to finish in around a minute. You can then attempt to restart the device’s setup process. Push and then let go of the right button to do this. Keep in mind not to apply excessive pressure.

Related Post: How To Change the Power Source on The Ring Doorbell?

Explore Also:

Creativehouseblog
Dietsheriff
Mycleanseplan

Frequently Asked Questions [FAQs]

Related Post: Ring Live View Not Working on Android and What to Do?