Ring Battery Not Holding Charge: Reasons & Fixes
You’re not the only one who has observed that the battery in your Ring devices is not retaining a charge as it once did. This thing can provide security threats because a dead battery leaves your house susceptible.
First, look for any problems with the power supply and charging line. To clear any dirt or debris that might be interfering with charging, clean the battery and the charging connectors. Check the battery’s condition too.
What Causes The Battery Of A Ring Camera To Drain So Quickly?
There are quite a few reasons for a battery being incapable of holding a charge. Let’s find out.
1. Settings
It’s a good idea to initially check your settings if you experience issues with your Ring devices. The duration that your Ring doorbell maintains a charge depends largely on settings in the Ring app.
For instance, motion sensitivity may be a consideration. Your gadget will activate more frequently and use more battery power the more responsive it is to motion.
To that end, reducing the motion sensitivity on your device can aid in minimizing battery-draining operations.
After you receive a low battery alert from the Ring app, it will frequently offer you alternatives to change settings that normally consume power.
The frequency with which your gadget checks for motion is one setting you can change. Advanced Motion Detection contributes as well by minimizing the quantity of unnecessary video and conserving battery power.
Try changing these settings, then make sure that the Ring doorbell or camera is fully charged and watch it carefully. Great if your battery lasts! If not, it’s important to look into further causes for why your battery is depleting so quickly.
2. Cold Conditions
According to Ring, cold weather has a negative impact on the battery life and hardwired charging efficiency of your Ring gadget. The battery might not retain its charge effectively around roughly 36°F/3°C.
The battery could not even start charging if it falls another 4°. Unfortunately, this also applies to doorbells that are hardwired. The battery may completely fail if it reaches a temperature of -5°F/-20.5°C.
Make sure to fully charge your devices when it’s time to recharge them before bringing them back outside.
Try bringing the complete doorbell inside the next time if your batteries are removable and you usually only charge the battery. In doing so, the battery can charge while the entire unit can warm up.
The battery life should get better as the temperature rises.
3. Defective Battery or Device
It might be necessary to change the battery if the conditions are ideal but the battery isn’t retaining a charge. Try acquiring a spare battery first. Ones are available at Ring, Best Buy, and even Amazon.
Use the new battery to swap out the old one once you’ve made sure it’s completely charged. If the replacement battery maintains a decent charge, you’re fine on your way.
If the battery is still not holding a charge and the fault wasn’t with you, the Ring device is probably to blame.
4. Inadequate Wi-Fi Connection
A bad Wi-Fi connection could be to blame if the battery on the Ring doorbell or safety camera is depleting too quickly.
Your doorbell may regularly disconnect and rejoin from your Wi-Fi network due to a bad connection, wasting energy, and accelerating battery depletion.
Poor Wi-fi Connection Symptoms:
Symptoms of a weak Wi-Fi signal or interference from obstructions include:
- devices that are having issues reconnecting to Wi-Fi
- There could be diminished or distorted audio or video quality.
- notification delays
- Unrecorded Motion Events
- Live View connection issues
Related Post: 5 Reasons Why Your Ring Doorbell 2 Battery Not Charging (Fixes Added)
How to Fix Wi-Fi Connection Problems
You can fix the Wi-fi connectivity issues in the following ways;
Switch off your Router
The easiest answer is frequently this one. Unplug your router to turn it off, then hold the position for 30 seconds.
Reconnect the router and give it between 30 and 60 seconds to boot up. Your Ring gadget ought to rejoin the Wi-Fi network on its own.
Remove the Physical Barriers
The range of Wi-Fi can be decreased, the signal can be distorted, or it can be completely blocked by specific construction supplies and other household goods.
Heavy-duty walls, metal, stucco, fish tanks, bookcases, big mirrors, sliding glass doors, TVs, video game consoles, baby monitors, and smart appliances are a few examples of these materials.
You can get the strongest connection by positioning your router such that a wifi connection has the clearest path through your Ring device.
Bring your Ring Device and Router Closer Together
If at all feasible, try bringing your router and Ring device closer to one another telepathically. Occasionally, advancing your connection only requires a few feet.
The router can also be moved to an open space or raised a few feet from the ground. You might also relocate the security camera to a location nearer the router if it is mobile, like a Ring Stick Up Cam.
Change your Router
Consider replacing your router if it is four years old or older. It can be the reason for sluggish or irregular performance.
The Ring app allows you to monitor the strength of your Wi-Fi signal.
You might try changing the channel on your Wi-Fi router if you’ve attempted all of these solutions and are still experiencing issues.
Alternatives Ring Battery Device
Let’s presume you want to know your other options because you don’t want to deal with the hassle of Ring’s battery-powered gadgets or because you simply don’t want to.
A fully-hardwired doorbell is one of the first solutions you might think about, particularly if you want to continue with Ring. There are several options from Ring, including the Ring Doorbell Elite, Ring Doorbell Pro, and Ring Doorbell Wired.
Utilizing the doorbell’s existing wiring, the Pro and Pro 2 are wired. However, the Ring Doorbell Elite connects to power and the internet using PoE (Power over Ethernet), which requires an ethernet wire.
You may experience the same problem as you do with Ring if you decide to use another smart home vendor for your exterior cameras or video doorbell.
This is so because lithium-ion batteries, which power the majority of rechargeable devices, frequently react poorly to freezing temperatures.
Blink’s outside cameras have been considered as a potential solution by some. Instead of a rechargeable lithium-ion battery, they use two lithium AA batteries.
Although some claim that these batteries last for months, especially in cold conditions, you will occasionally need to replace them.
Related Post: Who Makes Ring Cameras?: The Brand You Can Rely On To Make Your Place Secured
Frequently Asked Questions [FAQs]
How can I extend the life of my Ring battery?
You can disable power-hungry functions like Snapshot, Pre-Roll using the Ring app to extend the battery life of your Ring Video Doorbell.
How long does a rechargeable battery last?
Batteries that are rechargeable typically have a lifespan of two to five years and are capable of being charged numerous times.
Can I leave the battery charger for my Ring on all night?
Overnight battery charging is acceptable occasionally.
Do lithium batteries have a lifespan?
Although lithium batteries rarely go bad, they do lose some energy when they’re just lying around.
How long does it take the Ring Camera battery to charge?
Depending on how much energy life is left in the battery, it typically takes the battery 5 to 10 hours to charge completely.