Blink Doorbell Backplate Replacement

Blink’s doorbell backplate plays a vital role in ensuring the doorbell is securely mounted, protecting it from damage and ensuring optimal performance. If the plate gets damaged by any physical force you can simply replace it.

Some sellers from Amazon sell the Blink doorbells back plate. And most importantly, if you tell the blink about your broker backplate, they will replace it free of charge. Let’s know about the Blink doorbell backplate replacement.

When Blink Doorbell Backplate need Replacement?

The backplate acts as the foundation for your Blink Doorbell. It provides stability and support to the Blink doorbell. It is mainly a mounting bracket that holds the doorbell securely in place.

Without a properly fine backplate, your doorbell may become loose, affecting its functionality and potentially causing damage.

As the backplate is made of plastic, over time, the backplate may show signs of wear and tear, indicating the need for a replacement. Some common signs include:

• Cracks or damage on the backplate
• Loose or wobbly doorbell
• Difficulty in pressing the doorbell button

If you notice any of these signs, it’s time to consider replacing the backplate.

And most importantly you will get a new backplate for your Blink doorbell if your one is damaged.

Just knock the Blink tech support and they will send you a new one free of charge.

Blink Doorbell Backplate Replacement: Step by Step Process

To replace the backplate of the Blink doorbell, you will only need a screwdriver to replace it.  Before you get started, make sure you have all the hardware from your Blink packaging readily available.

Step 1:

Choose the wall you want to mount the backplate. It is recommended to pick a spot nearly 40 to 48 inches high from the ground.

Step 2:

The Blink video doorbell is weather-resistant. The battery compartment door of the device ensures a watertight seal closes it securely until it clicks.

The backplate is used for mounting to a wall and does not impact weather resistance.

Place the template on the wall you want to set up the doorbell.

Step 3:

Drill a hole at the top and bottom positions. Only use the middle hole for uneven or small surfaces.

Step 4:

Remove the template. Align the backplate to the holes you drilled and use the included screws to manually screw the backplate to the wall. Don’t over-tight them.

Step 5:

Align the top edge of the video doorbell to the backplate at an angle so it aligns.

Push it firmly against the backplate until you hear and feel a click to confirm it’s in place and secure.

Do not worry if there is a gap between the doorbell and the backplate.

Connecting To Your Ring Doorbell Stuck – FAQs