Blink Sync Module Solid Blue Light Only

The Blink Sync module has light indicators that light up and give the users notifications about what is going on with the system. A solid blue light only on the Sync Module typically indicates that the device is not functioning properly and is not connected to the network.

Also, there are a few potential reasons why you might encounter a solid blue light and some troubleshooting steps you can take to resolve the issue. Stay with the article to know about the Blink sync module solid blue light only.

Quick Looks

Normal Operation: If the camera is operational, it shows solid blue light.
In the Setup Mode: Connect to the Wifi, and relog into the Blink account.
Poor Internet connection: Power Cycle the camera and restart the router.
Old Firmware: Go to the app update and install the latest firmware.

6 Reasons Why Blink Sync Module has Solid Blue light only

Here are 6 main reasons why your Blink sync module has solid blue light only:

1. Normal Operation

After a quick reset, if you see the Blink Sync module has a solid blue light, that means it is operational and it is cycling its power. And that is completely normal.

Sometimes when a firmware update is ongoing the sync module tells the user with the solid blue light on the sync module.

But that usually stays for 15 to 20 seconds. When the solid blue light stays for a long time that means you have other things to worry about.

2. The Sync module is in setup mode

If you have just reset your Sync Module, it will be in setup mode and will show a solid blue light. To exit setup mode, follow the instructions in the Blink app.

Here are the steps:

Open the Blink App.
Tap the “+” sign.
Select the Wireless system.
Scan the serial number of the sync module and select your camera.

Tap “Discover Devices”.
Tap “Join”, and it’s Done.

3. Battery or power source issues

Insufficient power supply or low battery levels can impact the functionality of the Blink system.

If the camera’s batteries are running low or the sync module is not getting enough power to function, it may not be able to work properly. Thus it can show the solid blue lights only.

Ensure that the camera is powered by fully charged batteries or a stable power source to maintain optimal performance.

4. Check the Internet and the router

If your Wi-Fi is weak and the sync module struggles to connect with the internet, then it can show a solid blue light too. For weak networks or Wi-Fi, the camera cannot connect to its module. Then it notifies via showing the lights on the module.

If the distance between the camera and the sync module is very far, then problems arise. The distance between the Wi-Fi and the sync module is also an important factor in keeping the system functional.

To solve the connectivity issues, you should ensure that the Blink camera is within range of the sync module and the Wi-Fi router. Check for any potential physical obstructions or interference that may hinder the wireless signal. Objects like walls, large furniture, or other electronic devices can disrupt the connection.

5. Firmware or software-related problems

Outdated firmware or software introduces bugs and glitches that affect the system’s performance.

It is crucial to keep the camera’s firmware and software up to date by regularly checking for updates and installing them when available Giga Secure.

Firmware and software updates often include bug fixes and improvements that can address motion detection issues.

How to Fix Blink Sync Module Solid Blue Light Only Issue

Here are the simple fixes and troubleshoots to fix the Blink Sync module solid blue light only:

1. Firmware Update

The first thing to do is update the firmware if there is available any.

Check if there are any available firmware updates for your Blink Camera.
Updating the firmware can fix potential bugs or compatibility issues that may be causing the solid blue light problem.
Open the “Blink App”, navigate to the “Camera settings”, and check for any “Firmware updates”. Follow the instructions to install them if available.

After that, the solid blue light should go away. And if not try troubleshooting the system.

2. Basic troubleshooting of the Blink system and the router

As the firmware update is not working, you can troubleshoot the system and the router by simply restarting them.

By doing this the whole system turns all together and possibly starts working again. And the Blink sync module solid blue light only should be turned off.

3. Check and improve the connectivity settings

You have to make sure the internet is strong and it has good connectivity with the sync module. If you have a weak signal, change the router or change the position of the router/ module placement.

Here are the steps you can check if the network has full strength:

Open the “Blink App”
Click the “Device settings” icon on the right.

Open “General settings” and check the Blink module connection strength.

Open “General settings” and check the Blink module connection strength.
If you have a full signal, then there is something else to blame for the problem. And if the signal strength is weak, then keep the router close to the sync hub to interconnect.

Do not forget to move the module nearer the router or eliminate any potential interference sources.

4. Check the Battery Status

A faulty battery or bad connection with the sync module can be the reason for the blink sync module’s solid blue light only.

If there is no light on the camera, that means the batteries have died.

To check the battery life:

Open the Blink App
Click the device settings icon on the right.

Go to General Settings and find Battery Level.

If the batteries are dead, replace them, and the flashing red lights will be fixed.
Buy two 1.5-volt Lithium non-rechargeable batteries and install them.

You have to make sure the sync module has enough power to function. Check the wires and the power source. Change the wire and socket.

5. Reset the whole system

Now the hard part is if nothing is working against the solid blue light.

You have to reset the whole thing. From the camera to the sync module.

To reset the sync module, follow these steps:

On your Sync Module, find the Reset Button. It is at the bottom and right by the USB port.

Press and hold the button for 10 to 20 seconds.
Keep holding the button until it turns red.
After some time the LED should change the light to solid green and blinking blue.

To reset the camera follow these steps:

The Blink cameras have a built-in reset button for quick reset. Blink offers many types of security cameras. The reset button can be in different places camera-wise.

Blink is the most popular Blink camera in the market. Here are the step-by-step procedures on how to reset a Blink camera.

You will find a reset button under the Blink Mini. Take a narrow pin and hold the button for 5 seconds until the red light stops flashing and turns blue.
Reconnect the camera to the power source. In the Blink App, go to the settings.
Go to Change Wi-Fi
Select Discover Device
A pop-up menu will appear, and select “Join.”
Then Enter the network password
Select Done

After all the setup is done, the solid blue light should go away, and if not contact customer support to claim the warranty.

Related Post: Blink Camera not Detecting Motion Far Away: Reasons & Fixes

Explore Also:

Creativehouseblog
Dietsheriff
Mycleanseplan

Blink Sync Module Solid Blue Light Only – FAQs

Why is my Blink module not blinking?

If you are having issues with the sync module unplug the power cord from the unit and wait for 10 seconds. Then plug it in. This can potentially solve the issues with the sync module.

Why is my sync module not working?

Reboot your Wi-Fi router and keep the router closer to the sync module.

Why won’t my blink module blink blue?

Make sure the internet connection is good and the camera has enough battery life.

Will Blink work without a module?

The blink system requires a module. This acts like a brain for the system. You cannot use Blink outdoor and indoor cameras without the sync module. But you can use Blink wired floodlight and the video doorbell without the module.

Blink Sync Module Solid Blue Light Only