Blink Stuck on Connecting to Blink Server: Causes and Fixes

If your Blink camera is stuck on connecting to the Blink server, you’re not alone. This issue prevents your camera from functioning properly and compromises the security of your home.

Bad internet connection and outdated software are some of the reasons behind the problem.

Fortunately, there are several troubleshooting methods you can try to resolve this problem and get your Blink camera connected to the server again. Let’s know about the problem and solve the issue for Blink stuck on connecting to Blink server.

Quick Looks:

Poor Internet connection: Make sure the camera and the sync module are connected to the Internet. And keep the router’s bandwidth at 2.4 GHz.
Dead Battery: Check the battery status and change it.
Old Firmware: Go to the app update and install the latest firmware.
Faulty software: Reset the camera and the sync module.

Why Does Blink Stuck On Connecting To Blink Server: 5 Reasons

Here are 6 main reasons why your Blink system is stuck on connecting to Blink server:

1. Weak Wi-Fi Signal

A weak Wi-Fi signal can be a reason for this problem. When the Wi-Fi is weak the Blink module struggles to connect to the network. And that leads to the stuck screen on connecting to Blink server.

At that time, the Blink sync module actively searches for the internet and tried to connect to the server so that it could upload the data to the server.

2. Battery or Power Source Issues

The most common issue of the problem is a dead battery. When the battery of the camera is low, it fails to maintain a stable connection with the sync module.

So a low battery can be a reason why your Blink system is stuck on connecting to Blink server.

3. Router that is too Far Away from the Doorbell

The distance between your Blink camera and Wi-Fi router can affect the strength of the Wi-Fi signal and, for this, it loses the ability to connect to the Blink server.

4. App or Software-Related Problems

If your Blink app faces a glitch, while connecting to the server, the Blink stuck on connecting to the Blink server. It won’t let you do any task from the app. Sometimes it happens when the system gets interrupted on updating the data or after an unfinished file upload.

5. Old Firmware

If your Blink system is running on old firmware, it will struggle to do every single task. Blink always keeps their users updated by updating the system firmware.

If you miss one or two updates the system will not run smoothly and this can make the Blink stuck on connecting to Blink server.

Related Post: Why Does My Blink Camera Battery Die So Fast?

How to Connect Blink Servers: The Fix

Here are the simple fixes and troubleshoots to solve the problem:

1. Check the Wi-Fi Network

The first thing to solve this issue is to ensure that your WiFi network is working properly and your Blink camera is within range. As you already know a weak Wi-Fi signal can prevent the Blink system from connecting to the Blink server.

Here are some steps you can take to check your WiFi network:

Check Signal Strength: Move your Wi-Fi router closer to your Blink sync module and check the Wi-Fi strength. If the camera is located far from the router, consider adding a Wi-Fi extender to improve coverage Giga Secure.
Restart Router: Sometimes, a simple router restart can resolve connectivity issues.

Unplug your router, wait for a few seconds, and then plug it back in. Allow the router to fully reboot before connecting your Blink system.

Verify Network Credentials: Double-check the SSID and password entered for your Wi-Fi network. Ensure that there are no spelling mistakes or special characters in the password that may cause authentication issues.
Wi-Fi Settings: If you have recently changed your WiFi network settings, such as the network name or password, you may need to reset the WiFi settings on your Blink camera.

And make sure your Wi-Fi has a 2.4 GHz frequency. Because the Blink system only operates in 2.4GHz frequency.

2. Check if the Blink Server is Down

If there is a problem going on with the server that means you cannot connect to Blink’s server. You have to wait for some moment to fix the server.

Check Blink’s website and its news portal to see if there is any server outage.

If the server is fine and you have tried all the steps above, contact Blink support and claim the warranty.

3. Update the Firmware

It’s important to keep your Blink camera’s firmware up to date to ensure optimal performance and compatibility. Follow these steps to check for and install firmware updates:

Open Blink App: Launch the Blink app on your smartphone or tablet. Select the camera you are facing the issue.
Check for Updates: Look for the “Firmware Update” option within the camera settings. If an update is available, follow the on-screen instructions to download and install it.
Reconnect to Server: After updating the firmware, check if the camera successfully connects to the Blink server. If the issue persists, move on to the next troubleshooting method.

4. Reset the Camera and the Sync Module

The Blink cameras have a built-in reset button for quick reset. The reset button is at the bottom of the camera, as shown in the image.

Here are the step-by-step procedures on how to reset a Blink camera.

Once you find the reset button under the Blink Mini, take a narrow pin and hold the button for 5 seconds until the red light stops flashing and turns blue.
Reconnect the camera to the power source. In the “Blink App”, go to “Settings”.
Go to Change “Wi-Fi”
Select “Discover Device”
A pop-up menu will appear, and select “Join.”
Then Enter the network password
Select “Done”

After resetting the camera, it should be able to reach the Blink Cloud and you can connect to the server.

After resetting the camera, reset the sync module.

To reset the sync module:

Find the reset button on the Sync module
Pick a thin pin, press, and hold the reset button for 15 to 30 seconds. You have to wait until it lights red.
After resetting the sync module it will take you to the setup mode. And then you will see a solid green and blue flashing light. Reconnect your Sync Module to your wireless network.

Explore Also:

Creativehouseblog
Dietsheriff
Mycleanseplan

Frequently Asked Question – [FAQs]

Why does the light turn red when connecting to Blink server?

The red light on the Blink camera shows the camera is not connected to the internet.

Why my Blink sync module is not connecting?

When there is something wrong with the internet connection or the router, the blink sync module cannot function properly. Reboot your router and power cycle the Blink system to solve the issue.

How do I reset my Blink connection?

Press the reset button for 5 seconds to reset the Blink system. And it will reset the connection too.

Can I use Blink without linking to Amazon?

Normally you cannot use your subscription plans until you connect your Amazon account to your Blink account.

Blink Stuck on Connecting to Blink Server: Causes and Fixes