Why Does My Google Home Keep Disconnecting?

Why does my google home keep disconnecting? Your Google Home may be experiencing frequent Wi-Fi disconnections due to a poor Wi-Fi signal or significant interference from nearby networks and/or other devices. 

If Google Home repeatedly disconnects from the network, check for any physical issues with the device and the network router directly. Restart the Wi-Fi router and Google Home if there isn’t a problem, then move them near together. 

Continue reading to learn how to diagnose and resolve any connectivity issues you may be having with Google Home. 

Why Does My Google Home Keep Disconnecting: Easy Steps to Fix It?

You might be thinking Why does my Google Home keep disconnecting? Many problems, from mismatched bandwidth and wireless connection problems to occasionally even signal strength concerns, are simple enough to resolve on your own without expert assistance. Let’s have a look. 

1. Run a Device Setup

After the network has been erased, the Google Home speaker will need to be linked to the Google Home app once more. 

Check for changes once you add the device again and input your network credentials. After that, hopefully, you won’t have frequent Google Home outages.

To reset your device’s configuration, you can do the following.

• Launch the Google Home application.
• Press your Google Home speaker button.
• Go to Settings by clicking the gear symbol at the top.
• Then choose “Device Information.”
• Next to the Wi-Fi, tap “Forget.”

You will need to repeat the steps to re-establish your device with your phone after completing the aforementioned steps.

• Reopen the Google Home application (if it was closed).
• Press and hold the plus (+) symbol on the home screen.
• Choose “Set up device.”
• Observe the guidelines displayed on the screen.

Related Article: What Breaker Should Doorbell Be on: Dedicated Circuit Breaker for Doorbell?

2. Divide up your Wi-Fi equipment into 5 GHz and 2.4 GHz bands

Google Home uses the 2.4 GHz or 5 GHz frequency spectrum to establish a Wi-Fi connection. Unfortunately, a lot of other gadgets also use both of these frequencies.

Your Google Home competes with your laptops, tablets, smartphones, smart TVs, and pretty much anything else in your house that is Wi-Fi connected for connectivity.

Interference may arise throughout the connection attempt process. Your Google Home may occasionally “randomly” lose its Wi-Fi connection as a result of this interference.

Your Google Home may experience interference from the Wi-Fi gadgets of your neighbors as well.

Try connecting your router’s 5 GHz band to all of the Google devices and the 2.4 GHz band to every other Wi-Fi device as a potential solution.

This will cut down on the quantity of devices using the 5GHz frequency, which should lessen interference. Your router and Google Home should now have a stronger signal overall as a result. 

3. Change the position of your Google Home

Moving your Google Home physically to a new location, ideally nearer to your router, is another option.

This ought to have several advantageous outcomes.

You should be able to get stronger Wi-Fi by relocating the Google Home nearer to your network. The location closest to the router consistently has the strongest signal.

Related Article: Cheap Security Cameras That Connect to Your Phone: Peace of Mind on a Budget

4. Re-add the Bluetooth pairing after deleting it

Use Bluetooth to share rather than Wi-Fi, and remember to take your iPhone out of the linked devices list and add it back in

Here’s how to use the Google Home app to take your iPhone out of the list of associated devices:

• Get your iPhone’s Google Home app open.
• To open Settings, touch Google Home, then the gear symbol.
• Go to Devices > Paired Bluetooth. Google Home speaker and phone disconnect.
• To end the pairing, touch the X symbol.
• Return now and access the System Settings.
• Use Bluetooth touch.
• Toggle on Bluetooth and press the “i” button to the right of the speaker.
• To delete the Google Home speaker, select Forget this device from the list of associated devices. removing the speaker phone’s connection to Google Home
• Return to Google Home > Speaker > Settings (gear) > Paired Bluetooth devices at this point.
• Press to activate the pairing mode.
• Return to System Settings>Bluetooth and pair your iPhone to your Nest speaker or Google Home speaker once more.

5. Use “WiFiman” to measure Wi-Fi interference and strength.

Obtain accurate information about your Wi-Fi strength and that of your neighbor. 

If your mesh system allows it, one of your biggest causes of interference could be a neighbor’s robust WiFi network next to one of your routers or access points.

However, how can you determine with certainty whether your router’s signal is weak or whether your neighbor’s Wi-Fi is to blame?

You can easily find it out. You should first download the “Ubiquiti WiFiman” app, which you should be able to do on an iPhone or Android device.

You can assess the Wi-Fi power of your network and any other nearby Wi-Fi signals with this free app.

You may use the app to wander about your house and view the Wi-Fi signals and their strength in each spot by visiting the “channels” page.

To receive a precise position reading from your Google Home, I advise leaving the app running and placing your phone quite close to it.

Your coverage in that area should be enough if your network is at the top of the list. It is ideal to see between 67 and 70 dBM on the app when it comes to WiFi strength.

Check how powerful the neighbor’s network is about your own if it becomes visible.

Related Article: Benefits Of Smart Security Cameras: How They Can Improve Your Home Safety

If the signal in that region isn’t strong enough, you may want to add a WiFi extender or, if your router is mesh, add another satellite node (access point).

6. Upgrade your iPhone

As the next step, confirm that the firmware version on your device is the most recent or at least the most recent one. Nest and Google Home speakers update automatically, saving you the trouble.

You can use these steps to see if your iPhone has any updates:

• Allow for open configuration.
• Speak with the General.
• Choose “Software Update.”
• Install updates after downloading them.

Related Article: Cheap Home Security Cameras Do It Yourself: DIY Security on a Dime

7. There are too many devices linked to your router

The restrictions of your mesh Wi-Fi system or router may be the cause of your Google Home’s frequent disconnections. Make sure your router has both 2.4 and 5 GHz bands, even if it is brand-new, to prevent interference on one frequency. 

Signal balance is improved by two bands. Choose a router that can support numerous connections at once; some routers have trouble with this kind of traffic, which can result in sporadic dropouts. 

Upgrade to a router made specifically for smart homes to maximize performance. For suggestions, see my post on the top routers for smart homes Giga Secure. 

The performance of your Wi-Fi-enabled devices is greatly improved by the proper router setup, which also fixes connection problems and guarantees a more seamless experience. 

Explore Also:

Creativehouseblog
Dietsheriff
Mycleanseplan

Frequently Asked Questions: FAQs

How can I resolve the internet issue with Google Home?

Reconnect the power to your primary Google WiFi point or Google Nest WiFi router, then wait for it to fully turn on. 

What is the process for updating Google Home?

• Launch the app from Google Play Store.
• Press Menu. My games and apps.
• Locate the Google Home application.
• Press Update. 

How do I reset the Google Home Mini?

• Hold down the factory reset button on the bottom of the Home Mini, which is situated beneath the power cord.
• See if the base has a circle engraved into it. Your smartphone will start the factory reset procedure after 5 seconds.
• Hold on for a further ten or so seconds, or until a sound indicates that the gadget is restarting.

How can my Chromecast be reset?

Make sure the Chromecast is switched on and hooked into the TV before pressing and holding the back button. The LED ought to begin blinking yellow.

Release the button to reset the Chromecast when the LED light goes solid white.