Blink Camera Flashing Red 6 Times – Causes & Fixes

Encountering unexpected issues with home security cameras can be frustrating. Many of the Blink home security camera users have reported many flashing red light issues.

Usually, the flashing red lights indicate that the camera detects motions, but that should not be longer than a second or two. Low battery is one of the common reasons why the Blink camera flashing red 6 times. But there can be other problems too.

This article will tell you the possible reasons why your Blink camera is flashing red 6 times and provide potential solutions to help you troubleshoot and resolve the issue.

Blink Camera Flashing Red 6 Times

What Causes Blink Camera Flashing Red 6 Times?

Feature-wise, if the Blink camera detects a motion, it notifies the owner by flashing the red lights. But that is usually for a second.

There could be some other reasons why the Blink Camera flashes Red 6 times. Here are the reasons:

1. Low Battery:

One of the most common reasons for a Blink camera to flash a red light six times is its low battery. When the battery level drops significantly, the camera alerts you by flashing the light repeatedly.

If that is the case, then you should replace the camera battery. The Blink camera needs two AA batteries to operate. And before changing the batteries, check the battery status first.

2. Network Connectivity Issues:

If the camera is connected to a weak or unstable internet connection, then the camera flashes red lights. For weak networks or Wi-Fi, the camera cannot connect to its module. Then it notifies via showing flashing LEDs.

Sometimes it can be 5 times or 6 times after starting the video recording.

To resolve this, you need to keep your camera and the module closer to the main Wi-Fi router so that they can connect to the internet properly.

3. Sync Module Communication Error:

When the sync module fails to communicate properly with the camera, it may result in a flashing red light. It happens when the distance between the camera and the sync module is very far.

The sync module is like a control system to the system. The camera records the video and sends them to the sync module, and then it uploads to the cloud for the users. When the camera cannot connect to the module, the camera starts flashing red lights.

4. Firmware Update in Progress:

Blink periodically releases firmware updates to enhance camera performance and add new features. If your Blink camera is flashing red six times, it could indicate that a firmware update is in progress.

While updating the firmware, the camera can keep flashing till the update is completed. To check if there is any firmware update ongoing, go to the Blink app and check the firmware.

5. Hardware or Software Malfunction:

In rare cases, a blinking red light may indicate a hardware or software malfunction. If none of the above solutions resolves the issue, consider contacting Blink customer support for further assistance.

After all, there are technical issues with the camera’s software or firmware that can cause it to flash red lights.

Related Post: How to Fix Blink Mini Camera Red Light Issue?

How To Fix Blink Camera Flashing Red 6 Times?

Here are some steps you might try to take if your Blink camera is flashing red 6 times:

1. Reset your camera

The Blink cameras have a built-in reset button for quick reset. Blink offers many types of security cameras. The reset button can be in different places camera-wise.

Blink Mini is the most popular Blink camera in the market. And here are the step-by-step procedures on how to reset a Blink Mini camera.

  • You will find a reset button under the Blink Mini. Take a narrow pin and hold the button for 5 seconds until the red light stops flashing and turns blue.
  • Reconnect the camera to the power source and Wi-Fi.

2. Check the Network Connectivity

If you still have the flashing red lights issues after resetting the Blink camera, the internet connection could be the culprit here. You can check the wifi strength in the Blink App.

  • Open the Blink App
  • Click the device settings icon on the right.
  • Open General settings and check the Blink module connection strength.
  • If you have a full signal, then there is something else to blame for the problem. And if the signal strength is weak, then keep the router close to the sync hub to interconnect.
  • Do not forget to move the module nearer the router or eliminate any potential interference sources.

3. Disconnect and Reconnect the Blink camera to Wi-Fi

Sometimes simply reconnecting to the Wi-Fi can solve the flashing red light issue. To reconnect the Sync module to the Wifi, follow these steps:

  • Open the Blink App.
  • Tap the “+” sign.
  • Select the Wireless system.
  • Scan the serial number of the sync module and select your camera.
  • Tap “Discover Devices”.
  • Tap “Join”, and it’s Done.

4. Check the Battery Status

The camera can flash red lights if it has dead batteries. You can check the battery status from the app.

If there is no light on the camera, that means the batteries have died.

To check the battery life:

  • Open the Blink App
  • Click the device settings icon on the right.
  • Go to General Settings and find Battery Level.
  • If the batteries are dead, replace them, and the flashing red lights will be fixed.
  • Buy two 1.5-volt Lithium non-rechargeable batteries and install them.

However, make sure the firmware on your Blink camera is up to date. The Blink app allows you to check for firmware upgrades, and if they are available, you may update the camera by following the on-screen instructions.

Updates to firmware frequently include bug fixes and upgrades that can assist in fixing connectivity problems. And it is also important to update your phone if there is any update available.

Related Post: Why Is My Blink Camera Not Recording Without Subscription?

Frequently Asked Questions [FAQs]

Why is Blink flashing red?

The red flashing of Blink cameras usually notifies that the module cannot connect to the internet.

How do I stop my Blink camera from blinking?

To stop the flashing lights on Blink cameras, Open the camera app > Go to the settings > Go to Status LED > Always Off.

How long do batteries last in Blink cameras?

Usually, the Blink cameras should last about two years. With the two AA 1.5-volt batteries, the cameras can record 5,882 seconds of live view and 43,200 seconds of motion-activated recordings.

Related Posts:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *