2 Ring Doorbells on One Transformer and How to Do This?
Some homeowners ask if it’s possible to run many Ring doorbells off of a single transformer as the demand for improved surveillance rises.
To do so, confirm that the transformer’s power matches the needs of both doorbells. Additionally, if supported, connect doorbells in parallel or series to the transformer’s terminals.
Read the full article to learn in detail how to connect two ring doorbells on one transformer.
What Type of Transformer Is Important to Power Two Ring Doorbells?
You will require a compatible low-voltage transformer to efficiently power two Ring doorbells. Here is a more thorough breakdown of the transformer specifications:
Voltage Output:
A voltage output of 16 to 24 volts AC is commonly necessary to Ring doorbells. For the doorbells to operate as well as possible, it counts to select a transformer that delivers the right voltage.
The devices may have operating problems or damage if a transformer is present whose voltage output is outside of this range.
Power Capacity:
The highest amount of power the transformer is capable of supplying is indicated by its power capacity, which appears in Volt-Amps (VA). And users need a transformer with a power of at least 30VA or more to operate two Ring doorbells at once.
Make sure the transformer’s capacity meets or exceeds the whole power needs of the two doorbells since each Ring doorbell model specifies its power requirements.
Compatibility and Wiring:
It is important to confirm that the transformer complies with local electrical rules and is compatible with the electrical system in your home.
Inspect to see if the transformer can handle the wire configuration needed to power two doorbells.
Make sure the transformer supports your preferred wiring layout because you may need to wire the doorbells in parallel or in series depending on the transformer’s design.
Ring Doorbell Models:
Power requirements for different Ring doorbell models could differ slightly.
Users always need to remember that consulting the manufacturer’s specs and guidance for each model determines specific transformer requirements.
Related Post: Troubleshooting Ring Setup on Android Devices
Related Article: Causes and Solutions for Ring Doorbell Charging Port Broken
How To Install 2 Ring Doorbells on One Transformer?
It is very easy to install two ring doorbells on a single transformer, but it is important to carefully follow the instructions to ensure correct installation and operation. To do it:
Before beginning the installation:
1. Identify the transformer’s size and wattage
You must decide the transformer’s size and wattage before you begin since it decides how much power it can produce.
Also, users must check the wattage which determines how much electricity a transformer can produce. Use a transformer with enough wattage to run both doorbells.
2. Determine how much wattage each of the doorbells will require
Determine how much power each doorbell will use overall. The doorbells’ wattage is important since it decides how much power they need to function.
Then, add the wattage of both doorbells to check if the transformer can offer enough power.
Steps for Installing Two Ring Doorbells on one Transformer:
Related Article: Ring Doorbell White Light Not Spinning: How to Fix?
1. Turn Off Power
Turn off the power to the existing doorbell and any other electrical circuits you’ll be dealing with before beginning the installation. This guarantees your safety during the procedure.
2. Inspect the Transformer
Search for the transformer, which usually lies close to the main electrical panel. Make sure that it matches the voltage and power specifications of both Ring doorbells.
3. Examine the compatibility of the wiring
Verify that the wiring in the home allows for the installation of two doorbells on a single transformer. The wiring for the doorbells may need to be done in parallel or series, according to the transformer’s arrangement.
Related Article: Ring Doorbell Offline but Still Recording: How to Fix This?
4. Attach the doorbells
Install the first Ring doorbell to get things started. To firmly fasten it to the correct spot next to your front door, use the screws and mounting brackets that are included.
Then, as per the manufacturer’s installation guidelines, attach the wiring from the transformer to its terminals. Verify that you have attached the wiring firmly.
Test how the Ring doorbell works after turning on the electricity. Verify whether it receives power, sends notifications, and permits live viewing.
Similar to the first Ring doorbell, attach the second one nearby and check that it receives enough power.
5. Test both doorbells and modify preferences and settings
Restart the power source and check both Ring doorbells to make sure they are operating properly. Verify the operation of the live view, notifications, and chime Giga Secure.
Then, use the Ring app to adjust the settings and preferences for both doorbells, including chime settings, motion detection, and notification options.
Related Article: 6 Reasons Why is my Ring Not Notifying Me of Motion?
2 Ring Doorbells on One Transformer: How to Manage and Customize Settings?
It’s simple to manage and customize settings for two doorbells on a single Transformer using the Ring app. Here are the ways how to do so:
- Open the Ring app on your phone or tablet and log in using the same account that you used to configure both Ring doorbells.
- To examine a list of the Ring devices you have linked, open the main menu and choose “Devices” from the menu.
- Choose the first Ring doorbell you want to manage from the list of devices. You may then access the settings and health data for the device.
- You may adjust the doorbell’s settings using a variety of choices found in the device settings.
- Depending on your preferences, change settings for motion detection sensitivity, motion zones, and motion alert frequency.
- Click “Notifications” to change the kind of alerts you want to get for the particular doorbell.
- To receive notifications exclusively at particular times of the day, you can configure motion scheduling if you choose so. This may eliminate the need for pointless notifications.
- Tap “Save” or “Done” to save your settings after making changes.
- Do the same with the second Ring doorbell.
Explore Also:
Creativehouseblog
Dietsheriff
Mycleanseplan
You can monitor and manage each doorbell separately from the Ring app once you’ve adjusted the settings for both of them.
Related Post: Ring Doorbell 2 Not Connecting to Wi-Fi: What to Do?
Frequently Asked Questions [FAQs]
Does it affect the performance or video quality of two Ring doorbells when they are connected to the same transformer?
Connecting two Ring doorbells shouldn’t significantly affect their operation or video quality if the transformer is the right size and the wiring is set up properly.
What happens if the transformer is unable to supply two Ring doorbells with enough power?
If the transformer is not powerful enough to power both doorbells, you can experience problems like irregular performance, poor video quality, or repeated battery charging. In these circumstances, upgrading to a stronger transformer is advised.
Is it possible to see both Ring doorbells at once on the Ring app?
The Ring app does allow you to concurrently view two Ring doorbells. From all connected Ring devices on the same account, the app gives you access to live feeds and notifications.
Can I connect a certain number of Ring devices to one transformer?
Depending on the power capacity of the transformer and the total amount of energy used by all connected devices, a single transformer can support a certain number of Ring devices.
