Ring Doorbell Light Not Spinning After Hard Reset: What To Do?
It can be worrisome if the Ring doorbell’s light doesn’t spin or activate as it should after conducting a hard reset.
Verify the power supply and look for firmware updates to prevent such an uncommon occurrence. Else contact Ring customer service for more help if the problem continues.
Consider reading the entire article on the Ring doorbell light not spinning after a hard reset in detail.
Ring Doorbell Light Not Spinning After Hard Reset: The Causes
There are several potential causes why the Ring doorbell light fails to spin after a hard reset. The following causes are listed:
Firmware or Software Glitches:
The firmware or software of the doorbell occasionally experiences temporary faults or errors that prevent the light from spinning after a hard reset.
This can be the result of a failed update or a problem with the reset procedure.
Incomplete Hard Reset:
The doorbell might not have returned to its factory default settings completely if the hard reset wasn’t done properly. This can cause persistent problems that interfere with the light’s normal operation.
Power Issues:
The spinning light on the doorbell can malfunction if the power source is insufficient or unreliable. Depending on the Ring doorbell model, this can be the result of a broken transformer, bad wiring, or even a dead battery.
Related Article: Ring App An Error Occurred Please Try Again Later: Explained
Hardware Malfunction:
The issue could have its origins in a hardware malfunction, such as a broken motor that spins the light. The motor may cease to function as intended over time or for other reasons.
Firmware Update in Progress:
The Ring doorbell may launch a firmware update after a hard reset to guarantee it has the most recent software version. The light may briefly go off throughout this updating procedure till it is finished.
Network Connectivity Issues:
The operation of the spinning light can get affected if the doorbell’s connection to the internet or Ring’s servers is not stable, particularly if the light’s activity is dependent on specific online events.
Rarely, a manufacturing flaw in the doorbell that alters the way the light spins may exist.
Related Post: Ring Doorbell 2 Not Spinning White: What to Do?
Related Article: Ring Notification Not Working on Android: Reasons and Fixes
Ring Doorbell Light Not Spinning After Hard Reset: How To Solve?
Follow these troubleshooting procedures to fix the problem of the Ring doorbell light not spinning after a hard reset:
1. Verify the power supply
Ensure the Ring doorbell is receiving sufficient power from the transformer or battery. Verify that the transformer is providing the correct voltage output (typically 16 to 24 volts AC) and has an adequate power capacity (VA) to handle the doorbell’s requirements.
If your Ring doorbell runs on a battery, make sure it is fully charged and inserted correctly.
2. Verify Firmware Update
Verify the firmware on your Ring doorbell is updated. After the hard reset, the gadget can be downloading and installing a firmware update. Give it some time to finish the update before observing any changes in how the light spins.
To perform the firmware update, follow the steps below:
- On your tablet or smartphone, run the Ring app.
- For your Ring doorbell, visit the “Device Settings” page.
- Look for any available firmware updates, and then install them by following the instructions.
- After the update, let the doorbell reset before checking to see whether the light turns on.
Related Article: Troubleshooting Ring Setup on Android Devices
3. Run another hard reset
Try performing the hard reset once more while carefully following the manufacturer’s instructions if the initial attempt did not completely reset the doorbell.
Performing another hard reset may fix the issues with incomplete resets occasionally.
4. Verify network connectivity and look for firmware or software bugs
Try power cycling the doorbell by removing it from the power source and re-connecting it if you think there may be a firmware or software issue. This may assist in resolving transient software problems.
After that inspect the doorbell’s Wi-Fi network connection to make sure it is functioning properly.
The functioning of the doorbell, particularly the spinning light, can be subject to a poor or unreliable internet connection.
5. Factory Reset
Consider executing a factory reset as a final option. Remember that a factory reset will reset the doorbell to its initial settings and configurations by erasing all of them. For the proper procedure, refer to the manufacturer’s instructions.
To reset:
- Locate the doorbell’s reset button.
- Tap on the reset button and hold it for 15 to 20 seconds Giga Secure.
- Utilize the Ring app to re-configure the doorbell.
- If not, continue your troubleshooting or get in touch with customer service. See if the light starts spinning.
Explore Also:
Creativehouseblog
Dietsheriff
Mycleanseplan
Related Post: Ring Doorbell 2 Not Connecting to Wi-Fi: What to Do?
Related Article: Ring Doorbell 2 Not Connecting to Wi-Fi: What to Do?
Frequently Asked Questions [FAQs]
Why does my Ring doorbell’s light not spin after a hard reset?f
The reason the light isn’t spinning could be a firmware bug, an incomplete reset, a power problem, a hardware issue, or an active firmware update.
What should I do if a factory reset doesn’t make the doorbell light spin?
Verify the power supply, look for firmware updates, and guarantee good network connectivity. Get help from Ring customer service if the issue continues.
Is it secure to carry out numerous factory and hard resets?
Avoid performing several resets without first determining the cause, even if it’s normally safe to do so. Contact customer service or a professional if the problem continues.
