What to Do If My Wyze Cam V3 Red Light Stays On?

Security surveillance cameras like the Wyze Cam V3 are well-known. However, you can run into a problem where the camera’s red light stays on. Even while not actively streaming or recording, this might still occur.

Many people may be concerned by this sudden behavior and question what can be generating the constant red light.

In this post, the causes of the wyze cam v3 red light stays on will be examined. Read through the troubleshooting guide to to learn how to locate and properly solve this issue.

Wyze Cam V3 Red Light Stays On

5 Causes and Fixes of Wyze Cam V3 Red Light Stays On

There are a number of common explanations for the Wyze Cam V3 red light to be on continually. You can solve the problem more successfully if you are aware of these possible reasons. Follow these procedure for the problems:

1. Scheduled Recording

The red light will remain on if the camera is actively capturing or streaming video, which is the most obvious cause.

Also, the camera may be streaming to a connected device or any planned or timed recording activities are currently taking place.

Fix:

  • Verify the Wyze app to see whether any planned recording events or triggered recording rules are in use. If required, disable them or alter them.
  • Check to make sure no other devices are streaming or using the camera’s feed. This may also cause the red light to appear.
  • Remove any connected devices, then check to see whether the red light stays on.

2. Firmware Bugs

Outdated firmware or software bugs may be the blame for the red light’s continued illumination.

The firmware on your Wyze Cam V3 may have not been updated for a while. Refusing to accept a firmware upgrade might result in compatibility problems or glitches.

Fix:

  • Go to the Devices tab in the Wyze app by opening it.
  • Choose your Wyze Cam V3 from the available devices.
  • In the upper right corner, tap the Settings icon (gear symbol).
  • Select Device Info by descending the page.
  • You will notice a button to upgrade the firmware if one is available.
  • To start the update process, adhere to the instructions.
  • Check to see whether the problem has been fixed when the update is finished.

3. Power Issues

Problems with the power supply might cause the camera to behave erratically, including keeping a constant red light on.

The camera may not be linked to a dependable power source appropriately. If you do not use the original power adaptor that Wyze supplied, the red light might also be illuminated.

Fix:

  • Make sure the power adapter for the camera is firmly inserted into a dependable power outlet.
  • Make sure the cable between the power adapter and the camera is securely fastened by inspecting it.
  • To rule out any problems with the power supply, try using a different power outlet or power adapter.
  • Try connecting the camera straight into a wall socket if you are using a power extension cable or surge protector. Any possible power-related problems will be resolved as a result.  

4. Connectivity Problems

The red light may continue to flash due to poor network connectivity or a lost internet connection. Your Wyze Cam V3 may not be linked to a reliable Wi-Fi network with a good signal.

Your router also might not be working properly and fail to provide connectivity with the Wyze Cam V3.

Fix:

  • To strengthen the signal, move the camera closer to your Wi-Fi router.
  • Look to see if other devices in your house or workplace are having network connectivity problems. Your Wi-Fi router should be restarted to update the network.
  • To restart your Wyze Cam V3, navigate to the Devices page in the Wyze app and click Restart Device.
  • If the red light problem doesn’t go away, try resetting the camera’s network settings in the Wyze app.
  • Do the following: Settings > Advanced Settings > Reset Wi-Fi settings. Reconfigure the camera’s Wi-Fi connection after that.

5. Sensor Issues

The Wyze Cam V3’s red light could occasionally stay on as a result of a faulty sensor. If the sensor is damaged or gone faulty, red light sometimes stay illuminated as a result.

Fix:

  • If you’ve tried every other troubleshooting technique and the problem with the red light is still not fixed, it’s conceivable that the camera’s sensor is broken.
  • For more help, get in touch with Wyze’s customer service.
  • Give them specific details about the problem, the methods you took to solve it, and any error messages or odd behavior you saw.

Alternative Solution: Factory Resetting the Wyze Cam V3

You can look into an alternate remedy such as the factory reset if the Wyze Cam V3 red light issue still exists after you’ve performed the previous troubleshooting methods.

Resetting the factory settings can assist in resolving persistent problems. Here is how to factory reset the Wyze Cam V3:

  1. Detach any memory card or MicroSD card.
  2. Find the little setup button on the bottom of the camera.
  3. Press and hold the setup button. Keep pressing for at least 10 seconds to perform the factory reset completely.
  4. You will see the camera’s status light blinking while you are holding down the button. Hold the button down until there is a noise.
  5. Wait until the camera has finished the reset procedure before releasing the reset button. There will be a voice that says “ready to connect”.
  6. The status light will become solid red and keep flashing after the camera has done its factory reset, signifying that it is finished.
  7. The Wyze app may now be used to configure the camera once more. Observe the app’s on-screen prompts and directions.

Take a look at this video for a visual demonstration.

Related Post: What Should You Do If Your Wyze Cam V3 Stopped Working?

Wyze Cam V3 Red Light Stays On – FAQs

Can I turn off the Wyze Cam V3’s red light?

The Wyze Cam V3’s red status indicator may be turned off, yes.

How to turn off the Wyze Cam V3’s red light?

Go to the camera’s settings in the Wyze app, choose “Advanced Settings,” and turn off the “Status Light” feature. By doing so, the red light will go off and the activity will be more covert.

What does a blue light mean on my Wyze Cam V3?

A blue light suggest the Wyze Cam V3 has been installed correctly.

Related Posts:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *