Why Does it Shows Red Light on The Wyze Camera at Night?

At night, the infrared (IR) LEDs on your Wyze camera are probably enabled, which is why the camera may emit red light.

The IR LEDs are responsible for the red glow that you can see. When Wyze cameras are set to night vision, this is a typical and anticipated response.

The presence of red light signifies that the camera is enhancing its night vision by using infrared illumination.

Different Status Light on Wyze Camera – What’re the Meanings?

Every Wyze device has a helpful status light that identifies the device’s current state. You can find the Cam outdoor and base Station’s status lights on the back of each device.

Let us look at the different red lights and what they are indicating:

1. Solid Red Light

Solid red light is indicating that,

The power is on and the camera is starting.
streaming a live event
videotaping an event

2. Flashing Red Light

The camera is operational and prepared for a WiFi connection.
The siren is going off and the red light is flashing quickly.

Alternative error state,

The QR code is wrong.
The network connection is unavailable due to a timed-out connection.
Unsupported network encryption technique.

3. Flashing Red and Blue Lights

The camera is attempting to connect to WiFi.
Using a microSD card to upgrade while scanning a QR code
Internet not working

Related Post: How to Fix the Wyze Base Station Yellow Light?

What to Do When the Solid Red Light Appears

If you have difficulties with the solid red light on your camera at night you can adopt the following steps to get rid of it.

1. Power Cycle the Camera

To restart the camera, unplug it from the battery source and give it a few extra seconds. Should the red light still appear, connect it back in after that. Power cycling can be used to fix momentary hiccups or faults.

2. Have a Look at the Wi-Fi Connection

Make sure your camera is linked to a reliable Wi-Fi network by checking the connection. The operation of the camera may have problems due to a shaky or unreliable Wi-Fi connection.

When the signal is weak, you may have to relocate the camera nearer to the router or think about buying a Wi-Fi extender.

3. Check the Power Supply

Ensure that a dependable power source is used to power the camera. Verify the cable and power outlet for any problems, and that the power converter is plugged in securely.

To rule out power-related issues, try an alternate power outlet or use a different cable.

4. Camera Reset

You might consider resetting the camera if the red light continues. Use a paperclip or other suitable instrument to find the reset button, which is typically a small hole, then press and hold it there for roughly 10 seconds.

This will return the camera’s settings to their initial state. Once the camera has been reset, repeat the setup procedure to re-connect it to the internet via Wi-Fi.

5. Firmware Update:

Make sure your camera is using the most recent firmware. Through the Wyze app, you may check for firmware upgrades and, if any are available, install them.

Firmware updates frequently include patches for bugs and other enhancements that help solve problems.

6. Seek Wyze Support:

After doing the aforementioned methods, should the red-light situation still exist, it is advised to contact Wyze customer care for additional guidance Giga Secure.

In addition to general troubleshooting advice, they may assist you with any hardware- or firmware-related problems.

Always refer to the official Wyze assistance materials and heed their advice for troubleshooting techniques appropriate to your particular camera type and circumstance.

When Does Flashing Red Light Appear on Whyze Cameras?

If a flashing light exhibits any strange behavior, you can take the following actions:

Start by simply removing the camera’s power and plugging it back in again to see if that fixes the issue.
If the camera starts to blink red again and doesn’t reconnect, you can set it up as an additional device. Open the Wyze app, then select the Add button.
You may then select Camera by tapping the Add Device option. Choose your camera now.
To reset the camera, follow the on-screen instructions.

Should you Conceal the Wyze Camera’s Red Light?

On phony security cameras, it could be worthwhile to conceal the red light because it can be a reliable indicator that the device is fake.

So, you should not cover the red light on night vision cameras up because doing so will reduce the camera’s capacity to see in the dark.

All of that light will be lost if the camera’s IR LEDs are covered by something, rendering the camera incapable of using night vision. Despite the fact that the camera continues to operate, the recorded video will either be totally or very dimly lit.

On common security and automation cameras, status indications, such as red lights, can frequently be hidden without severely harming the camera.

Explore Also:

Creativehouseblog
Dietsheriff
Mycleanseplan

Nevertheless, being unable to check the camera’s condition could prevent you from noticing a potential issue. For instance, you could not realize that the camera’s battery is low or that it is malfunctioning.

Wyze Camera Red Light At Night – FAQs

What causes my Wyze camera to malfunction at night?

Check to see if your Wyze Cam has night vision capabilities and IR lights turned on if you are having trouble seeing or recording at night. Examine the camera for damage if the problem persists. As a repair, perform a factory reset.

Why does my Wyze camera only capture color images at night?

Check and turn off the IR lights on your camera in these circumstances. The device is prompted by IR lights to recognize and record footage in monochrome.

Does the camera’s red light indicate on or off?

If you notice the lights becoming red, the camera is activated.

Do hidden cameras have a red blinking light?

In low light, the majority of hidden cameras’ red or green LEDs will blink or glow.

Related Posts:

Why Does it Shows Red Light on The Wyze Camera at Night?