When Does Wyze Camera Blinking Blue Light? (Fixes Included)

A blue light can illuminate your Wyze camera for a variety of reasons. The majority of the time, though, it has to do with the condition of your camera. Depending on the state of the system, the status light will blink in a variety of different colors.

The Internet connection in your home is operational when the camera’s blue light starts to blink. However, it also shows that the camera’s setup process is almost finished and that it is about to be ready for use.

The blue light most likely won’t stay steady, though. It is possible to mount your Wyze camera to additional lights. You will be able to appropriately configure the system if you are knowledgeable about the camera’s lights.

Wyze Camera Blinking Blue Light

The Reason for Wyze Camera Blinking Blue Light

There are quite a few reasons your camera may blink the blue light. Let’s look at those reasons and figure out how to solve them:

1. App Misconfiguration

You may not be able to eradicate the blue light that blinks because the device is occasionally simply in trip mode.

This mode won’t harm the device in any way because its sole purpose is to put it into hibernation, so there’s no need to worry. Therefore, you shouldn’t panic

In this case, switching off the operating system and re-syncing the configuration via the base station is the recommended course of action.

The new configurations will need to be synced through the program, which will take some time. Nevertheless, you’ll also see that the blue light will stop flashing and connect.

Therefore, if the machine was operating flawlessly up to this point, you merely need to check for configuration problems. In some circumstances, you might also need to establish a new access point.

2. Issues in the Ethernet Cable

A bad ethernet cable may cause the blue light to blink. Many owners have mentioned that a faulty Ethernet cable is mostly to blame for the blinking problem.

To solve the problem, it is simply advisable to try your luck by replacing the cable; there is a good probability that the Base station will get connected to the router.

You will have a more thorough understanding of the matter once you check the Ethernet cable’s condition. The only option is to replace the cable if it appears to be broken or kinked strangely.

3. Problems in Port

One of the causes could be the router port. The main source of this issue can be too much junk in the port.

In order to improve your chances with the base station, first you need to clean the port filled with debris.

You can try a new port if the connection fails. People frequently have to deal with broken ports on their routers.

Therefore, if the base station is failing to connect and the LED indicator is still flashing blue, you should change the port as your next step.

4. Port Misconfiguration

It’s conceivable that your router’s port configurations are incorrect. The Wyze base station’s blue light blinking may be caused by changes you’ve made to the proxy settings on your network.

In order to restore everything to default settings, you must verify the port settings. If not, changing the cable connected to the router won’t help you solve the problem.

5. Bugs in the Camera

Infrared light from security cameras attracts bugs because they mistake it for a supply of heat or food. Bugs that are too close to a camera’s lens may obscure the image or cause erroneous motion detection warnings, therefore, causing the blinking.

Utilizing chemical repellents is a good choice for keeping bugs away from the camera. There are numerous kinds of pesticides and bug sprays on the market today that are intended for use outdoors.

Make sure you pick something that is safe to use around both people and pets and meticulously follow the directions.

How to Fix Wyze Camera Blinking Blue Light? (2 Easy Steps)

Now, let’s have a look at the alternative solutions to fix this issue:

Separate 2.4 GHz and 5 GHz Networks

In contemporary smart homes, many users employ hybrid 2.4 and 5GHz networks. However, a lot of smart devices, like your Wyze camera, support 2.4 GHz.

Therefore, you should divide your dual network in order to link up your camera.

Related Post: How To Tell If Your Wyze Camera Has Been Hacked and How to Prevent It?

Here is How I Propose to Alter the Network Bands.

Step 1: In the Command Prompt, type “ipconfig” to find the IP address.

Step 2: Copy your IP address numbers for the Default Gateway and insert these into your web browser.

Step 3: Enter your username and password, then click “login.” Find a setting that divides your 2.4GHz and 5GHz connections in step four.

This parameter may be identified by a variety of names, such as “Network,” “Wireless Mode,” or “Wireless Network Name.”

Step 4: Disable the option that permits the two networks to use the same name. And switch on the 2.4 GHz only setting.

Step 5: Your 2.4GHz network should now have a new name. By doing this, you are able to link devices to the network of your preference and give each network a distinctive name.

Step 6: Attempt to join the newly designated 2.4GHz network with your camera now. To do this, open the Wyze app and navigate to your camera’s settings, then click “Wi-Fi Settings.”

Select the 2.4GHz network you just identified, then input the password. And that should resolve the blue flashing problem.

Modify the Length of your Wi-Fi Password

Often installing the most recent firmware can result in brand-new issues. Sometimes it’s simply fresh bugs in the software!

If your Wyze cam was operating normally before the firmware update, the issue is probably with the firmware.

Update your Wi-Fi password as one remedy. But be careful to increase the password’s character count to 31.

Related Post: Wyze Base Station flashing Blue and Yellow

Wyze Camera Blinking Blue Light – FAQs

Can you disable Wyze’s blue light?

Tap the ON symbol next to the Bulb Color in the app will turn off your bulb.

What causes the blue-to-red color change on my Wyze camera?

The status light will turn blue when the camera is turned on but hardly moves. When it detects active motion inside its area of view OR when it is streaming, it will glow red.

When the camera is offline, does Wyze alert you?

Our system will now send you a push notification through the app to let you know whether your Sense Hub is offline or not.

Related Posts:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *