Why Does the Ring Doorbell Solid Blue Light Appear?
If there is motion detected or a doorbell rings, the blue light on the Ring doorbell illuminates. The doorbell even alerts you when the battery needs to be charged and becomes solid blue when it is finished.
Even if your camera is placed in a stealthy location, if the blue LED comes up, burglars may see where it is. Intruders seeking to enter your home will be drawn to the light, which will alert them to your presence.
Additionally, thieves can steal or deactivate cameras by using blue light to detect their presence.
It might be a good idea to always switch off the blue light on your Ring doorbell in light of these potential outcomes. For information on what to do with the Ring doorbell solid blue light, go through the full blog.
Key Takeaway
What Does a Ring Doorbell Solid Blue Light Mean?
The blue light serves to display the device’s status. It ought to turn on whenever you use the Ring app to participate in an actual event or respond to an event.
Activating the device, connecting to Wi-Fi, or indicating a low battery or level of power will also cause the LED to turn on or blink. Additionally, it should display a variety of blink patterns to show the user what the device is experiencing.
You can determine the state of the Ring right now based on what the light is doing.
- Light Is On: It implies that the device is participating in a live event through the Ring App.
- Spinning: It indicates that Wi-Fi is being connected by the device.
- Going Upward: An update is being installed on the gadget.
- Quick Flashing: Insufficient power is being delivered to the gadget.
- Inchmeal Flashing: It indicates that the gadget is in “Night” mode if it is flashing slowly.
- Flash For 1 second: When a device continuously flashes for 1 second on and 1 second off, it is linking to a new WiFi network.
- 4 Flashes: Four flashes indicate a low battery condition.
Once the live event is ended and you aren’t using the app, the blue light shouldn’t remain on. In this case, you may turn off the light by performing a device reset.
Two procedures exist for resetting a Ring Doorbell:
- Remove the battery or unplug the device > patiently wait for 30 seconds > return the power
- To reset the device, tap and hold the reset icon for 30 seconds using a pin, paperclip, or SIM card eject tool. Press and hold the button for 10 more
seconds.
Keep in mind that after you turn off the Ring doorbell’s blue light, you won’t be able to tell which of the above devices is in which state.
Related Article: Can You Have 2 Ring Doorbells at Different Locations?
Is it Possible to Switch Off The Ring Doorbell Solid Blue Light?
The blue light that appears on the Ring doorbell when something happens cannot be officially turned off at the moment.
The blue light serves as a visual cue that the doorbell is operational and recording, therefore according to Ring, there is currently no way to turn it off.
As previously said, Ring does not offer a way to turn off the blue light because they use it to let you know how your doorbell is doing.
The doorbell will let you know whether it needs charging, updating, sensing motion, configuring, etc.
You can quickly disable the blue light, though, by using a workaround. The good news is that many Ring users have given it a shot and succeeded in their goals.
You should also benefit from this, I hope. Here is the secret!
Related Article: How Many Ring Cameras Can You Have on One Account?
How Can I Disable the Ring Doorbell Solid Blue Light? A Clever Trick
Here is how you can switch off the blue light to avoid the hassle you are dealing with.
Step-1: Obtain a Blackout Tape
A light-blocking sticker, sometimes known as blackout tape, is the first thing you’ll need. Make certain that it primarily turns off LED indicator lights and has a great blocking effect.
Because of its effective light-blocking properties and absence of sticky residue after removal, I suggest ANGKEE’s Blackout Tape.
Related Article: Ring Doorbell Flashing Blue and Not Connecting: Causes and Fix
Step-2: Take the Faceplate off the Doorbell
You must take off the front cover before applying the tape. First, detach the safety screw at the Ring Doorbell faceplate’s base before attempting to remove it.
When the security screw is ready to be removed, insert the screwdriver’s tip into it and turn the handle in a clockwise direction. When the screw is removed, push the bottom of the faceplate forward with your thumb to raise it.
Put your other fingers in the center of the plate to provide as support. You can remove the faceplate from the base after it clicks into place. In a single motion, do this using your hand.
Step-3: Cover the Doorbell’s Round LED
Now, conceal the spherical LED on the Ring doorbell using the blackout tape. Strip tiny pieces of tape and attach them in a circular motion to the LED indicator, which is normally rounded, on the Ring doorbell.
Step-4: Cover the Faceplate of the Doorbell
Then, use blackout tape to conceal the oval translucent plastic ‘ring’ on the doorbell faceplate. Apply two or three coats if you want to totally block the light. You are almost there.
Step-5: Put the Faceplate Back on
Reinstall the doorbell’s faceplate to complete the process.
To accomplish this, slide the faceplate’s attachment tab from the top of the unit into the doorbell’s slot. When it clicks into place, push the faceplate again.
Finally, put the security screw into the bottom of the Ring Video Doorbell. It’s completed!
Related Post: Ring Battery Not Holding Charge: Reasons & Fixes
Related Article: 5 Reasons Why Your Ring Doorbell Not Charging from A Transformer
Negative Effects of Blocking Ring Doorbell Solid Blue Light
There are significant disadvantages of turning off the blue light. Let’s have a look at those
Failing to Detect the Device’s Status
The light that your doorbell emits is turned off when you cover its LED. The main disadvantage of having your Ring doorbell’s light turned off is that you can no longer tell how it is doing.
When the doorbell records video, charges, senses motion, or updates software, it won’t light up. So, think about covering the light on your doorbell if you are okay with giving up this perk.
Tape Removal Becomes a Pain
The technique can be difficult for you if you ever require taking off the tape for whatever reason. You must follow the same procedures you used to apply the tape in order to remove it. That takes a lot of effort!
If you want to remove and reapply the tape regularly, I advise against using this solution in this situation. because it makes it more likely that your device may be harmed Giga Secure.
Removal of Sticky Residue from Tape
Making the improper choice of tape, which detracts from the doorbell’s aesthetics, is a common error that people make. When removed from the surface of the doorbell, the incorrect tape could leave a sticky residue.
Explore Also:
Creativehouseblog
Dietsheriff
Mycleanseplan
We suggest people use blackout tapes with limited stickiness when applying them to technological devices. The reason for this is by doing so makes it simpler to get rid of the tape without leaving behind any sticky residue.
Related Post: 5 Reasons Why Your Ring Doorbell 2 Battery Not Charging (Fixes Added)
Frequently Asked Questions [FAQs]
Why does the light on my Ring doorbell stay on?
The Ring Doorbell’s voltage may be inconsistent, there may be an untied router wire, or there may be Wi-Fi difficulties.
Does the Ring camera’s blue light indicate that someone is watching?
Your Ring camera’s blue light is not a sign that someone is observing you.
Does Ring Doorbell have a nighttime light?
Only when a Ring Doorbell is hardwired will it remain lit.
Can the Ring camera see very far?
Motion can be detected by doorbells up to 30 feet away from a camera.
